+8617360734831 winnie@nanmingtrading.com
Categories
Contact Us
Baoding Nanming Trading Co.,Ltd
Add: Hanzun International 1410, Lekai North Street, Baoding City, Hebei Province
Mobile: +8617360734831
+8613373528000
Email: winnie@nanmingtrading.com

Hot-melt Road Marking Paint

Hot Melt Road Paint

Overview Hot melt road paint is also known as hot fusion cross paint.A paint used for road marking and various traffic signs. Features and Recommended use: • Retro-reflective thermoplastic road marking material with excellent whiteness • Based on aliphatic chemistry, offers superior weathering......

Send Inquiry

Overview
Hot melt road paint is also known as hot fusion cross paint.A paint used for road marking and various traffic signs.

Features and Recommended use:
• Retro-reflective thermoplastic road marking material with excellent whiteness
• Based on aliphatic chemistry, offers superior weathering resistance and colour stability  
• Intermix glass beads offers long lasting retro - reflectivity  
• Optimal balance between melt flow and flow resistance to achieve well defined lines as per the desired width and thickness  
• Excellent wear resistance and adhesion on asphalt roads  
• Suitable for application with manual, screed/ extrusion automatic machines

Directions For Use
• Heat the material to 180 - 200°C in the pre - heater with adequate agitation till the material becomes a homogenized liquid
• Ensure that the road surface is clean, free from dust and moisture
• Heavy deposits of paint require removal
• For aged asphalt roads and concrete roads application of Apcogrip, a primer coat is recommended for proper bonding of the material with the road surface
• Ensure that the primer is thoroughly dry and void of solvent prior to application of the thermoplastic material
• Ensure temperature of 180 - 200°C and adequate agitation during application • Do not hold thermoplastic above 180°C for more than 6 hours
• Do not heat the material above 220°C at any point of time.
• Change in colour indicates that the material has been scorched owing to overheating and needs to be discarded
• Drop - on glass beads must be immediately deposited after thermoplastic application