+8617360734831 winnie@nanmingtrading.com
Categories
Contact Us
Baoding Nanming Trading Co.,Ltd
Add: Hanzun International 1410, Lekai North Street, Baoding City, Hebei Province
Mobile: +8617360734831
+8613373528000
Email: winnie@nanmingtrading.com

Hot-melt Road Marking Paint

Yellow Hot-melt Road Marking Paint

Overview It is applicable to the center line, lane dividing line, edge line and diversion line of wheel rolling.Pedestrian crossings, intersections, parking lots, roads without lighting at night;Asphalt pavement has the best adhesion, followed by cement pavement.It is not suitable for sandy......

Send Inquiry

Overview
It is applicable to the center line, lane dividing line, edge line and diversion line of wheel rolling.Pedestrian crossings, intersections, parking lots, roads without lighting at night;Asphalt pavement has the best adhesion, followed by cement pavement.It is not suitable for sandy road, brick road, temporary road and the road to be expanded within half a year.

General overview 
Composition: single component coating composed of acrylic resin, face filler, auxiliaries, solvent, etc.
Characteristics: the paint film is tough, strong adhesion and excellent wear resistance. It has excellent water, alkali and weather resistance.
Application: used for marking asphalt road.
Appearance: yellow, red and white
Density: about 1.30
Coating method: roller coating, brush painting, spraying
Thinner: JB86 special thinner
Drying time: 23 2 ℃ : table dry for 3 minutes, 10 minutes of action
Coating intervals: 23 2 ℃ : minimum 1 hour
Theoretical dosage: 320~350 g/m2
Paint film thickness: wet film: 250 x m;Dry film: 100 mg;
Surface treatment: when brush or roller coating is applied, apply the brush in the same direction and do not reverse the brush back and forth to prevent leakage of asphalt.The diluted dose should be added in the right amount, not under the direct sunlight, to prevent the asphalt leakage.